External Lacquer can be used as a protective layer from scratches and corrosion and decorative layer such as acting as primer in order to increase adhesion of decorative ink as well as enhance glossiness and brightness of Print colors.
ENQUIRY / QUOTATION
Please fill in the form for any inquiry.
INTRODUCTION
Information
Description
External Side Stripe Lacquer
End use
In the food and general can packaging industry
Typical
Epoxy-modified
Substrate:
ETP
Colours
Clear
Thinner:
NJ-303 (Nantian Chemical)
Cleanup Thinner:
Aromatic hydrocarbon and ketone ether mixed solvent
Wet Colour:
Clear
Specifications
Viscosity:
4# Ford Cup @ 25 °C, 28+5 sec
Solids
28.0+2.0%
Specific Gravity:
0.930+0.02
Substrate
Tinplate, steel and TFS
Application
Application method
Roller Coater
Film Weight:
8 - 10 gsm dry
Curing conditions
10-20 seconds at 225ºC PMT (Peak Metal Temperature)
Advice
Mix well before use. Avoid sunlight.
Remarks
Storage
6 months when stored at 10-27ºC.
As an increase in viscosity can occur on storage an addition of thinner maybe required.